1GB Ram leave PC Blank? - blank pc boards
I Pent4 HP Pavilion Win XP I have installed currently 768 MB DDR PC3200 RAM
I've just today, 2 GB (2 x 1 GB's) 1 GB PC3200 400MHz DDR DIMM 184-pin
During installation, the PC do not boot - Do MHz a difference? after the scan line of motherboards should be able to handle up to 3 GB
Best regards Barry
Friday, February 12, 2010
Blank Pc Boards 1GB Ram Leave PC Blank?
Subscribe to:
Post Comments (Atom)
5 comments:
RAM is not compatible with your PC and get www.crucial.com thats guaranteed RAM work
My PC at home, I have 4 sticks of 1 GB of RAM, so I have in 4, and now nothing or custom show on the monitor. If I take an hour to complete, with 3 GB of RAM, it will work.
I Reduced the problem with my PSU (Power Supply) is not strong enough to run at all.
My PSU is 620W, and I have 3 SATA drives, high-performance SLI graphics card, quad-core performance, etc. drains so much power. I've tested with 1000W power supply and can now have 4 GB
Is DDR Dual Channel? If so, you must remove the old RAM and put on the new pair of memory sticks. I guess you have 3 slots. So you have Slot 1, Slot 2 and Slot 3, all in a line and say that his first report was in slot 1st Drag one of their new clubs in slot 1 and the other in 2nd slot If this fails, the outside slot 1 and put it in the slot 3 If this fails, or is likely not the type of RAM or DOA.
Try reseating the RAM, can not insert fully into the outlet.
Remove the memory that came with your computer so that only two new sticks in. Even with the installation of two new 2x 1GB sticks you in the slot with clips of the same color. eg. If you have a stick in the slot, with images of white, introduce it into the slot of the second clip of the other white.
Post a Comment